ADM2587EBRWZ: Signal and Power Isolated Data Transceiver
ADM2587EBRWZ is an isolated RS-485/RS-422 transceiver chip produced by Analog Devices, which can be configured as half-duplex or full-duplex.
Microcontroller ATmega series: ATMEGA8A-AU Introduction
The ATMEGA8A-AU is a popular 8-bit microcontroller from Microchip Technology (formerly Atmel) and part of the ATmega series. It is based on the AVR architecture and is designed for a wide variety of embedded applications.
STM32F030K6T6 Development Board Introduction
STM32F030K6T6 is a microcontroller (MCU) based on the ARM Cortex-M0 core produced by STMicroelectronics.
MPU-6050: High-Performance 6-Axis Motion Sensor with I2C Bus Interface
The MPU-6050 is a widely used Inertial Measurement Unit (IMU) that combines a 3-axis accelerometer and a 3-axis gyroscope.
Texas Instruments TPS51200DRCR
The TPS51200DRCR is a high-efficiency dual-channel synchronous step-down converter produced by Texas Instruments (TI) and is commonly used in applications that provide regulated power, especially in systems that require low power consumption and high-efficiency power management.
STMicroelectronics STM32F103VET6
STM32F103VET6 is a 32-bit microcontroller based on the ARM Cortex-M3 core produced by STMicroelectronics. It belongs to the high-performance product line of the STM32F1 series and is widely used in embedded applications such as industrial control, IoT devices, and home appliance control.
STMicroelectronics STM32F105VCT6
STM32F105VCT6 is a versatile and powerful microcontroller that combines an ARM Cortex-M3 core with a rich set of peripherals and low power consumption. Its 128 KB Flash, 16 KB RAM, and extensive I/O options make it a suitable choice for a variety of embedded applications in industrial, automotive, and consumer markets. Its robust features, such as USB, CAN, ADC, and DMA, along with low-power operation, make it a solid solution for systems requiring real-time processing and efficient power usage.
Texas Instruments ULN2003ADR
ULN2003ADR is a common high current power driver produced by STMicroelectronics. It is a variant of the ULN2003 series and is usually used to control high current loads such as stepper motors, relays, solenoid valves, etc.
ATMEGA328P-PU
ATmega328P-PU is an 8-bit microcontroller manufactured by Microchip Technology (formerly Atmel), widely used in embedded systems and development boards, especially popular on the Arduino platform.
STM32F407VGT6 Microcontroller
TM32F407VGT6 is a powerful and flexible microcontroller suitable for a variety of embedded applications. Its high performance, rich peripheral interfaces and powerful processing capabilities make it an ideal choice for developing complex systems.
MCIMX6G2CVM05AB
MCIMX6G2CVM05AB is a powerful application processor that combines high-performance processing capabilities and rich multimedia functions, making it very suitable for a variety of embedded applications. Its low power consumption characteristics and flexible interface design enable it to perform well in various industrial and consumer applications.
STM32F405RGT6
The STM32F405RGT6 is a high-performance 32-bit microcontroller produced by STMicroelectronics. It is based on the ARM Cortex-M4 core and is suitable for embedded applications that require high performance and processing power.
STM32F030C8T6
STM32F030C8T6 is a powerful and affordable microcontroller suitable for a variety of low-power and low-cost embedded applications. Its flexible peripherals and diverse application areas make it a popular choice for developers.
ULN2803ADWR
Overview of ULN2803ADWR features, functions, similarities, pinouts and related Q&A
ULN2803A
ULN2803A integrated circuit working principle, characteristics, applications, similar, and related questions and answers
STM32F030C8T6
STM32F030C8T6 Introduction
STM32F030C8T6 is a 32-bit microcontroller based on the ARM Cortex-M0 core produced by STMicroelectronics. It belongs to the STM32F0 series, which is suitable for cost-sensitive applications while providing rich peripherals and functions. Its flexible peripherals and diverse application areas make it a popular choice for developers
STM32F030C8T6 Features:
Low power consumption characteristics, suitable for battery-powered applications.
Multiple interface options for easy connection with other devices and modules.
Flexible GPIO configuration, supporting multiple functions.
Provide development tools and libraries for developers to get started quickly.
STM32F030C8T6 Application areas:
Consumer electronics: such as smart homes, wearable devices, etc.
Industrial control: for the control of sensors and actuators.
Medical equipment: such as portable medical monitoring instruments.
Automotive electronics: For basic automotive function control.
Prodcuts Comparison
STM32F030C8T6 Similar or Alternative
STM32F030C8T6 vs MKE02Z16VLD4 vs STM32F051C8T6 vs STM32F051C8T7 vs STM32F051C8T6TR Comparison
| Parameter | STM32F030C8T6 | MKE02Z16VLD4 | STM32F051C8T6 | STM32F051C8T7 | STM32F051C8T6TR |
|---|---|---|---|---|---|
| Image |  |  |  |  |  |
| Manufacturer | STMicroelectronics | NXP USA Inc. | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core Architecture | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Core Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 16 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 4 KB | 8 KB | 8 KB | 8 KB |
| Pin Count | 48 | 32 | 32 | 32 | 32 |
| Operating Voltage | 2.4V to 3.6V | 1.8V to 3.6V | 2.4V to 3.6V | 2.4V to 3.6V | 2.4V to 3.6V |
| I/O Pins | 37 | 26 | 32 | 32 | 32 |
| Timers | 2 x 16-bit | 2 x 16-bit | 2 x 16-bit | 2 x 16-bit | 2 x 16-bit |
| USART/UART | 1 | 1 | 1 | 1 | 1 |
| SPI/I2C | 1 x SPI, 1 x I2C | 1 x SPI, 1 x I2C | 1 x SPI, 1 x I2C | 1 x SPI, 1 x I2C | 1 x SPI, 1 x I2C |
| Analog Functions | 1 x 12-bit ADC | 1 x 12-bit ADC | 1 x 12-bit ADC | 1 x 12-bit ADC | 1 x 12-bit ADC |
| DMA | Yes | No | Yes | Yes | Yes |
| Temperature Range | -40°C to +85°C | -40°C to +105°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Package Type | LQFP48 | LQFP32 | LQFP32 | LQFP32 | LQFP32 |
| Special Features | - | Low-power features for low-voltage applications | - | - | - |
STM32F030C8T6 Datasheet PDF and Reference Manual
Download datasheets and manufacturer documentation for STM32F030C8T6
FAQs about STM32F030C8T6
1. What type of microcontroller is the STM32F030C8T6?
Answer: The STM32F030C8T6 is a 32-bit microcontroller based on the ARM Cortex-M0 core, suitable for low-power and low-cost applications.
2. What is the flash and SRAM capacity of the STM32F030C8T6?
Answer: The STM32F030C8T6 has 64 KB of flash and 8 KB of SRAM.
3. What communication interfaces does the STM32F030C8T6 support?
Answer: The STM32F030C8T6 supports multiple interfaces, including I2C, SPI, USART, ADC, and PWM output.
4. What is the operating voltage range of the STM32F030C8T6?
Answer: The operating voltage range of the STM32F030C8T6 is 2.4V to 3.6V.
5. What are the application areas for the STM32F030C8T6?
Answer: It is suitable for various fields such as consumer electronics, industrial control, medical equipment, and automotive electronics.
6. What is the operating temperature range of the STM32F030C8T6?
A: The operating temperature range is -40°C to +85°C, suitable for a variety of environmental conditions.
7. How to program and develop for STM32F030C8T6?
A: You can use STM32CubeIDE or other supported development environments for programming, and provide rich libraries and sample codes.
8. Does STM32F030C8T6 support low power mode?
A: Yes, STM32F030C8T6 supports multiple low power modes, which is very suitable for battery-powered applications.
9. What is the difference between STM32F030C8T6 and other STM32 models?
A: Compared with other STM32 models, STM32F030C8T6 mainly differs in processing power, memory and peripheral configuration, and is suitable for applications with strict requirements on cost and power consumption.
10. What is the package form of STM32F030C8T6?
A: STM32F030C8T6 usually adopts LQFP-48 package, which is suitable for surface mount applications.
11. How to choose a development board suitable for STM32F030C8T6?
A: You can choose a development board based on STM32F030C8T6, such as STM32F0Discovery or other compatible development boards, for quick start and development.
12. Does STM32F030C8T6 support interrupts?
A: It supports multiple interrupt functions, which is suitable for real-time control and fast response applications.
