【NEW】ALINX Releases AXVU13P: AMD Virtex UltraScale+ FPGA PCle 3.0 Development Platform

ALINX releases AMD Virtex UltraScale+ series FPGA PCIe 3.0 comprehensive development platform AXVU13P

Why is there a lot of photoresist residue on the microfluidic silicon wafer after development?

Why is there a lot of photoresist residue on the microfluidic silicon wafer after development?

Digital Isolator Technology Beyond Optocouplers

A digital isolator is an electronic device that uses non-conductive media such as light, magnetism or capacitance to transmit digital signals to achieve electrical isolation between different circuits. It has functions such as protecting sensitive circuits, resisting interference, signal conversion and improving system reliability.

What should be paid attention to when using voltage dependent resistor in the circuit

Varistors are a type of electronic component often used in surge protection circuits. What should we pay attention to when using varistors?

A Review of Wide Bandgap Semiconductor Technology

The most important of these products, such as silicon carbide (SiC) and gallium nitride (GaN), are revolutionizing the world of electronics with their superior properties over traditional silicon-based semiconductors.

What is the slew rate of an operational amplifier

Operational amplifiers have various parameters. This article mainly discusses the slew rate parameters of operational amplifiers. Taking the ADA4622-1 commonly used in ADI products as an example, this parameter and its impact on amplifier performance are explained.

Summary of common causes and countermeasures of inverter failure

Summary of common causes of inverter failures and solutions

The Future of PEM Fuel Stacks and PSO-ANFIS MPPT Technology

Driving the Clean Energy Revolution:PEMFS technology is driving the next revolution in clean energy, and the PSO-ANFIS MPPT controller provides strong support for its efficient operation.

The bright new star of the fourth generation of semiconductor materials - gallium oxide

Gallium oxide (Ga₂O₃) has been hailed as the "bright new star" of the next generation of semiconductor materials in recent years, and has attracted much attention due to its unique physical properties and wide application potential.

Industrial digital output expansion board based on IPS8200HQ

The X-NUCLEO-OUT16A1 industrial digital output expansion board for STM32Nucleo provides a powerful and flexible environment for evaluating the driving and diagnostic capabilities of the IPS8200HQ eight-bit high-end intelligent power solid-state relay in a digital output module connected to a 0.7A industrial load.

SiC, Chiplet, RISC-V: Three major innovative forces in the development of automotive semiconductors

Although the automotive market has slowed down and the forecast for automotive semiconductors has been revised downward, these new technologies will still improve the performance of automotive semiconductors and bring about technological changes...

How to precisely align the fiber end faces of fiber optic connectors?

Fiber optic connectors are the most basic optical passive devices in optical fiber communication systems. The most basic technical requirements of the system for fiber optic connectors include low insertion loss IL and high return loss RL, that is, as low reflection echo BR as possible.